Carlube 5W-30 C2/C3 Plus is a fully synthetic, low-SAPS oil suitable for use in both Petrol and Diesel engines. Suitable for vehicles fitted with Three Way Catalysts (TWCs) and Diesel Particulate Filters (DPFs) to meet European emissions requirements. 

SPECIFICATIONS

ACEA C2/C3, API SN, GM Dexos 2, MB 229.31/229.51, VW 502.00/505.01

ADVANTAGES

• Meets the durability requirements of C3 as well as giving the fuel economy benefits of C2 oil
• Low-SAPS technology therefore DPF, SCR & EGR compatible.
• Suitable for a wide variety of OEM\'s including Mercedes-Benz, Chevrolet, Vauxhall (Opel) and Volkswagen

AVAILABILITY

XAC010 - 1L

XAC050 - 5L

Carlube Triple R 5W-40 R-Tec 27 has been developed with low SAPS to protect expensive aftertreatment devices. Incorrect lubricants can quickly block Diesel Particulate Filters (DPFs) and poison Selective Catalyst Reduction (SCRs) devices, increasing exhaust backpressures and increasing exhaust emissions. Carlube Triple R 5W-40 R-Tec 27 is fully compatible with exhaust aftertreatment devices, supporting lower emissions and preventing expensive replacement costs or service bills.

Carlube Triple R 5W-40 R-Tec 27 surpasses the performance requirements of ACEA C3 in some circumstances, extending oil drain intervals up to 20,000kms when recommended by the manufacturer's handbook.

Tested at temperatures as low as -39oC, Carlube Triple R 5W-40 R-Tec 27 performs in cool climates when engines are at the most risk. It remains viscous and fluid and able to flow to the most vulnerable areas of an engine during the cold winter months in Northern Europe and beyond.

Guidance

Changing your engine oil depends on the type of vehicle, the mileage, driving styles and driving conditions. Always consult and follow your manufacturer's manual for the best guidance on when to change your engine oil and what type of oil to use. 

If necessary, you can check the oil level and easily top up your engine oil.

Ensure your car is on level ground, and the engine is cool and not running, simply open the bonnet, locate the bright handle of your oil dipstick and gently pull the dipstick. 

Clean the dipstick to identify the oil level markers then fully reinsert the dipstick and pull it out once more. The oil shown on the dipstick should sit between the high and low markers. 

If your oil is below the low marker, you should top up with the manufacturer's recommended engine oil grade and specifications.

Alternatively, you can book your vehicle for an oil change at your local garage.

Supplementary Information.

• SPECIFICATION - ACEA C3 API SP MB 229.31, Fiat 9.55535-S2
• Carlube Triple R 5W-40 R-Tec 27 surpasses the performance requirements of ACEA C3 in some circumstances, extending oil drain intervals up to 20,000kms when recommended by the manufacturers handbook.
• Tested at temperatures as low as -39°C, Carlube Triple R 5W-40 R-Tec 27 performs in cool climates when engines are at the most risk.
• Carlube Triple R 5W-40 R-Tec 27 is fully compatible with exhaust aftertreatment devices, supporting lower emissions and preventing expensive replacement costs or service bills

Carlube Triple R 5W-40 R-Tec 27 is a super-clean, ultra-high performing low SAPS (low in Sulfated Ash, Phosphorus, and Sulfhur) passenger car engine oil, designed to maintain engine efficiency by protecting against deposit formation, thereby ensuring piston cleanliness.

Specifications: ACEA C3, API SN, MB 229.31/229.51, BMW LL-04

Triple R 5W-40 R-Tec 27 has been formulated to keep the piston ring grooves clean and free of deposits for as long as possible to support efficient combustion chamber performance preventing piston blow-by.

Fully compatible with exhaust after-treatment devices Provides protection, durability and performance benefits

Carlube Triple R 5W-40 R-Tec 27 is a super-clean, ultra-high performing low SAPS (low in Sulfated Ash, Phosphorus, and Sulfhur) passenger car engine oil, designed to maintain engine efficiency by protecting against deposit formation, thereby ensuring piston cleanliness.

Specifications: ACEA C3, API SN, MB 229.31/229.51, BMW LL-04

Triple R 5W-40 R-Tec 27 has been formulated to keep the piston ring grooves clean and free of deposits for as long as possible to support efficient combustion chamber performance preventing piston blow-by.

Fully compatible with exhaust after-treatment devices Provides protection, durability and performance benefits

Carlube Triple R 5W-30 R-Tec 20 has been developed to surpass the specifications of many key vehicle manufacturers, addressing the concerns of vehicle owners. It meets ACEA C3 and the Daimler MB 229.52 specifications, as well as those of other leading vehicle manufacturers, offering extensive performance and protection.

Carlube Triple R 5W-30 R-Tec 20 is a fully synthetic engine oil developed with the very latest synthetic technology for today's modern vehicle requirements. Fully synthetic engine oils offer increased engine protection and longer engine life, reduced friction and enhanced lubrication during extreme chilly weather starts and increased fuel economy.

With ever-increasing fuel prices, it is important to use an engine oil that provides fuel economy benefits. Results of the CEC M111 fuel economy test show that Carlube Triple R 5W-30 R-Tec 20 can improve your vehicle's fuel economy performance by up to 2.1%, reducing operating costs for vehicle owners.

Additionally, Carlube Triple R 5W-30 R-Tec 20 delivers optimum engine durability. Its excellent flow properties allow it to quickly reach and lubricate key engine components, maximising wear protection. It provides over 60% more wear protection compared to the ACEA C3 test limits, maximising engine life and performance.

Guidance

Changing your engine oil depends on the type of vehicle, the mileage, driving styles and driving conditions. Always consult and follow your manufacturer's manual for the best guidance on when to change your engine oil and what type of oil to use. 

If necessary, you can check the oil level and easily top up your engine oil.

Ensure your car is on level ground, and the engine is cool and not running, simply open the bonnet, locate the bright handle of your oil dipstick and gently pull the dipstick. 

Clean the dipstick to identify the oil level markers then fully reinsert the dipstick and pull it out once more. The oil shown on the dipstick should sit between the high and low markers. 

If your oil is below the low marker, you should top up with the manufacturer's recommended engine oil grade and specifications.

Alternatively, you can book your vehicle for an oil change at your local garage.

Supplementary Information.

• SPECIFICATION - ACEA C2/C3-21 API SP BMW LL-04 MB229.31, MB229.51, MB229.52, OV0401547
• Carlube Triple R 5W-30 R-Tec 20 has been developed to surpass the specifications of many key vehicle manufacturers, addressing the concerns of vehicle owners. It meets ACEA C3 and the Daimler MB 229.52 specifications, as well as those of other leading vehicle manufacturers, offering extensive performance and protection.
• Fully synthetic engine oils offer increased engine protection and longer engine life, reduced friction and enhanced lubrication during extreme chilly weather starts and increased fuel economy.
• With ever increasing fuel prices, it is important to use an engine oil that provides fuel economy benefits. Results of the CEC M111 fuel economy test show that Carlube Triple R 5W-30 R-Tec 20 can improve your vehicles fuel economy performance by up to 2.1%, reducing operating costs for vehicle owners.

Carlube Triple R 5W-30 R-Tec 20 is a fully synthetic, mid-SAPS engine oil formulated to provide optimum durability for the latest generation of petrol and diesel engines.

Specifications: ACEA C3, API SN, MB 229.31/229.51/229.52, BMW LL-04

Especially suitable for vehicles fitted with after-treatment devices such as DPFs, EGR or SCR systems.

Triple R 5W-30 R-Tec 20 is a fully synthetic engine oil developed with the very latest synthetic technology for today’s modern vehicle requirements. Fully synthetic engine oils offer increased engine protection and longer engine life, reduced friction and enhanced lubrication during extreme chilly weather starts and increased fuel economy.

Carlube Triple R 5W-30 R-Tec 20 is a fully synthetic, mid-SAPS engine oil formulated to provide optimum durability for the latest generation of petrol and diesel engines.

Specifications: ACEA C3, API SN, MB 229.31/229.51/229.52, BMW LL-04

Especially suitable for vehicles fitted with after-treatment devices such as DPFs, EGR or SCR systems.

Triple R 5W-30 R-Tec 20 is a fully synthetic engine oil developed with the very latest synthetic technology for today’s modern vehicle requirements. Fully synthetic engine oils offer increased engine protection and longer engine life, reduced friction and enhanced lubrication during extreme chilly weather starts and increased fuel economy.

#N/A

Up to 75% of engine wear happens while your engine warms up. When the engine stops oils drain off critical engine parts, however Castrol MAGNATEC 5W-40 DPF\'s intelligent molecules don\'t. They cling to the engine like a magnet providing an extra layer of protection.

Castrol MAGNATEC 5W-40 DPF\'s formulation protects from the moment you start, dramatically reducing* engine wear, for protection you can see, hear and feel.

Castrol MAGNATEC 5W-40 DPF. Instant Protection From The Moment You Start.

*As tested in the industry Sequence IVA wear test.

Application

Castrol MAGNATEC 5W-40 DPF is suitable for use in automotive diesel and gasoline engines where the manufacturer recommends an API CF/SN or ACEA C3 5W-40 lubricant including vehicles fitted with a diesel particulate filter.

Castrol MAGNATEC 5W-40 DPF is approved for use in vehicles from a number of leading manufacturers please refer to specifications and owner\'s hand book.

Advantages

• Synthetic Diesel technology to provide increased protection in high and low temperature applications;
• Provides continuous protection for all driving conditions, styles and temperatures;
• Delivers superior performance under extreme cold start up conditions

Castrol MAGNATEC 5W-40 DPF - suitable for TDI, DI, Inter-cooled, Turbocharged engines, CRDI engines.

Product Performance Claims

• ACEA C3
• API CF/SN
• Meets Fiat 9.55535-S2
• Meets Ford WSS-M2C917-A
• MB-Approval 229.31/ 229.51
• OPEL OV 040 1547 - D40
• VW 505.00/ 505.01

Supplementary Information.

• Castrol MAGNATEC 5W-40 DPF is recommended for gasoline and diesel engines following API CF/SN or ACEA C3 5W-40 specifications, including vehicles with diesel particulate filters.
• Offers synthetic diesel technology for enhanced protection in various temperature conditions.
• Ensures continuous protection across all driving conditions and temperatures.
• Suitable for a range of engine types, including TDI, DI, Inter-cooled, Turbocharged, and CRDI engines. Meets ACEA, API, and manufacturer-specific performance claims.

Today\'s engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine\'s performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most.

Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Application

Castrol EDGE 5W-40 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends: ACEA C3, API SN/CF Lubricant

Castrol EDGE 5W-40 is approved for use in vehicles from leading manufacturers please refer to the product performance section and your owners handbook.

*GM dexos2TM: supersedes GM-LL-B-025 and GM-LL-A-025 : GB2D0114082

Advantages

Castrol EDGE 5W-40 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today\'s modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure

Product Performance Claims

• ACEA C3
• API SN/CF
• Meets Fiat 9.55535-S2
• Meets Ford WSS-M2C917-A
• GM dexos2(TM) *
• MB-Approval 226.5/ 229.31/ 229.51
• Renault RN 0700 / RN 0710
• VW 505 00/ 505 01

Supplementary Information.

• Castrol EDGE with patented Fluid TITANIUM enhances engine performance under pressure.
• Suitable for use in gasoline and diesel vehicles meeting ACEA C3, API SN/CF standards.
• Offers maximum engine protection, reduced friction, and proven performance.
• Complies with ACEA C3, API SN/CF, GM dexos2(TM), and other major specifications.

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That\'s annoying, but worse, it slowly damages your engine - permanently.

Uniquely, Castrol MAGNATEC\'s breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver unique patented protection designed specifically for modern driving

Non-stop protection from every start.

Application

Castrol Magnatec 5W-40 C3 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA C3, API SN or earlier specification 5W-40 lubricant. Castrol Magnatec 5W-40 C3 is approved for use in a vehicles from a wide range of manufacturers, please refer to the specifications section and your vehicle handbook.

Product Performance Claims

• ACEA C3
• API SN Plus
• BMW Longlife-04
• Meets Fiat 9.55535-S2

Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: MB 229.31/ 229.51/ 229.52

Supplementary Information.

• Castrol MAGNATEC features DUALOCK molecules that create a protective force field, reducing warm-up and stop-start wear by 50%.
• Specifically designed for modern driving, it offers continuous protection from every start.
• Suitable for use in gasoline and diesel engines with ACEA C3, API SN, or earlier 5W-40 lubricant recommendations.
• Meets specifications including ACEA C3, API SN Plus, BMW Longlife-04, Fiat 9.55535-S2, and MB 229.31/229.51/229.52.

Today\'s engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine\'s performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most.

Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Application

Castrol EDGE 5W-40 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends: ACEA C3, API SN/CF Lubricant

Castrol EDGE 5W-40 is approved for use in vehicles from leading manufacturers please refer to the product performance section and your owners handbook.

*GM dexos2TM: supersedes GM-LL-B-025 and GM-LL-A-025 : GB2D0114082

Advantages

Castrol EDGE 5W-40 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today\'s modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure

Product Performance Claims

• ACEA C3
• API SN/CF
• Meets Fiat 9.55535-S2
• Meets Ford WSS-M2C917-A
• GM dexos2(TM) *
• MB-Approval 226.5/ 229.31/ 229.51
• Renault RN 0700 / RN 0710
• VW 505 00/ 505 01

Supplementary Information.

• Castrol EDGE with patented Fluid TITANIUM enhances engine performance under pressure.
• Suitable for use in gasoline and diesel vehicles meeting ACEA C3, API SN/CF standards.
• Offers maximum engine protection, reduced friction, and proven performance.
• Complies with ACEA C3, API SN/CF, GM dexos2(TM), and other major specifications.

Today\'s engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine\'s performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most. Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine

Castrol EDGE 0W-30 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends API SP, ACEA C3 0W-30 lubricant. Please refer to your owners handbook.

Castrol EDGE W-30 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today\'s modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low-temperature performance

Specification

• ACEA C3
• API SP
• BMW Longlife-04
• BMW Longlife-19FE
• MB-Approval 226.5/ 229.31/ 229.51
• Opel OV 040 1547 - D30
• Opel OV 040 1547 - G30
• Renault RN 0700 / RN 0710

Supplementary Information.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Protects the engine for the entire drain interval even under extreme pressure
• Delivers high levels of fuel efficiency and low-temperature performance

Up to 75% of engine wear happens while your engine warms up. When the engine stops oils drain off critical engine parts, however Castrol MAGNATEC 5W-40 DPF\'s intelligent molecules don\'t. They cling to the engine like a magnet providing an extra layer of protection.

Castrol MAGNATEC 5W-40 DPF\'s formulation protects from the moment you start, dramatically reducing* engine wear, for protection you can see, hear and feel.

Castrol MAGNATEC 5W-40 DPF. Instant Protection From The Moment You Start.

*As tested in the industry Sequence IVA wear test.

Application

Castrol MAGNATEC 5W-40 DPF is suitable for use in automotive diesel and gasoline engines where the manufacturer recommends an API CF/SN or ACEA C3 5W-40 lubricant including vehicles fitted with a diesel particulate filter.

Castrol MAGNATEC 5W-40 DPF is approved for use in vehicles from a number of leading manufacturers please refer to specifications and owner\'s hand book.

Advantages

• Synthetic Diesel technology to provide increased protection in high and low temperature applications;
• Provides continuous protection for all driving conditions, styles and temperatures;
• Delivers superior performance under extreme cold start up conditions

Castrol MAGNATEC 5W-40 DPF - suitable for TDI, DI, Inter-cooled, Turbocharged engines, CRDI engines.

Product Performance Claims

• ACEA C3
• API CF/SN
• Meets Fiat 9.55535-S2
• Meets Ford WSS-M2C917-A
• MB-Approval 229.31/ 229.51
• OPEL OV 040 1547 - D40
• VW 505.00/ 505.01

Supplementary Information.

• Castrol MAGNATEC 5W-40 DPF is recommended for gasoline and diesel engines following API CF/SN or ACEA C3 5W-40 specifications, including vehicles with diesel particulate filters.
• Offers synthetic diesel technology for enhanced protection in various temperature conditions.
• Ensures continuous protection across all driving conditions and temperatures.
• Suitable for a range of engine types, including TDI, DI, Inter-cooled, Turbocharged, and CRDI engines. Meets ACEA, API, and manufacturer-specific performance claims.

Castrol EDGE 5W-30 C3

UNLOCK THE VERY EDGE OF PERFORMANCE

Description

With worldwide emissions regulations tightening there is a renewed challenge to produce more power whilst still improving engine efficiency. Never before has engine oil played such a key role to deliver performance.

Engines are complex, with many moving parts – movement that can waste useful fuel energy through inefficiency. With these losses, power can be impacted. The challenge is to maintain the high performance levels expected by drivers,

whilst engine technology adapts to meet the demanding legislative limits.

Castrol EDGE is stronger under pressure. It unlocks your engine's performance and efficiency to deliver more power with the same fuel.*

Castrol EDGE: unlock the very edge of performance.

* Greater power delivery for same amount of fuel used compared to 5W-40 baseline, demonstrated by engine testing for more than 80% of the Castrol EDGE portfolio in global sales volume in 2021.

Application

Castrol EDGE 5W-30 C3 is suitable for petrol, diesel and hybrid cars and designed to meet the latest specifications required by modern engines where the vehicle manufacturer recommends an ACEA C3, API SN/CF or earlier

specification 5W-30 lubricant.

*GM Dexos2TM supersedes GM-LL-B-025 and GM-LL-A-025 : GB2E0209082

Advantages

The Castrol EDGE range:

Recommended for world-leading car manufacturers, motorsport teams and mechanics

Demonstrates improved performance as a result of better fuel economy*

Delivers more horsepower and greater acceleration*

Stronger under pressure in today's modern engines

Suitable for use in hybrid cars

*demonstrated in Castrol engine testing relative to 5W-40 baseline, for more than 80% of the Castrol EDGE portfolio in volume in 2021.

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That\'s annoying, but worse, it slowly damages your engine - permanently. Castrol MAGNATEC\'s unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to protect. Castrol MAGNATEC. Non-stop protection from every start.

Application

Castrol MAGNATEC 5W-30 C3 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an API SN, ACEA C3 or earlier specification 5W-30 lubricant.

Advantages

Castrol MAGNATEC\'s unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver protection designed specifically for modern driving

Product Performance Claims

• ACEA C3
• API SN
• BMW Longlife-04
• Renault RN0700 / RN0710
• Meets Fiat 9.55535-S3
• Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: MB 226.5/ 229.31

Supplementary Information.

• Castrol MAGNATEC\'s DUALOCK molecules create non-stop engine protection.
• Suitable for gasoline and diesel vehicles following API SN, ACEA C3, or earlier 5W-30 specifications.
• Offers a powerful force field of protection and reduces warm-up and stop-start wear by 50%.
• Tailored for modern driving needs and meets various performance claims, including ACEA C3 and API SN.
• Castrol warrants it as suitable for vehicles with MB 226.5/229.31 specifications, and it\'s also compatible with BMW Longlife-04, Renault RN0700/RN0710, and Fiat 9.55535-S3.

Today\'s engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine\'s performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most.

Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Application

Castrol EDGE 5W-30 C3 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends: ACEA C3, API SN/CF 5W-30 Lubricant

Castrol EDGE 5W-30 C3 is approved for use in vehicles from leading manufacturers, please refer to the product performance section and your owners handbook.

*GM dexos2TM: supersedes GM-LL-B-025 and GM-LL-A-025 : GB2E0209082

Advantages

Castrol EDGE 5W-30 C3 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today\'s modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure

Product Performance Claims

• ACEA C3
• API SN/CF
• GMdexos2(TM)*
• MB-Approval 229.31/ 229.51
• Renault RN 0700 / RN 0710
• VW 505 00/ 505 01

Supplementary Information.

• Castrol EDGE 5W-30 C3 is suitable for gasoline and diesel vehicles meeting ACEA C3 and API SN/CF 5W-30 standards.
• Offers maximum engine performance, protection, and higher performance for modern vehicles.
• Transforms to be strongest under high pressure, reducing friction across engine conditions.
• Meets performance claims including ACEA C3, API SN/CF, GM dexos2(TM), MB-Approval 229.31/229.51, Renault RN 0700/RN 0710, and VW 505 00/505 01.

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times a year. That\'s annoying, but worse, it slowly damages your engine - permanently.

Uniquely, Castrol MAGNATEC\'s breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

• Form a powerful force field of protection
• Dramatically reduce both warm-up and stop-start wear by 50%
• Deliver unique patented protection designed specifically for modern driving

Non-stop protection from every start.

Application

Castrol Magnatec 5W-40 C3 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA C3, API SN or earlier specification 5W-40 lubricant. Castrol Magnatec 5W-40 C3 is approved for use in a vehicles from a wide range of manufacturers, please refer to the specifications section and your vehicle handbook.

Product Performance Claims

• ACEA C3
• API SN Plus
• BMW Longlife-04
• Meets Fiat 9.55535-S2

Warranted by Castrol to be completely suitable for use in vehicles where the following specifications apply: MB 229.31/ 229.51/ 229.52

Supplementary Information.

• Castrol MAGNATEC features DUALOCK molecules that create a protective force field, reducing warm-up and stop-start wear by 50%.
• Specifically designed for modern driving, it offers continuous protection from every start.
• Suitable for use in gasoline and diesel engines with ACEA C3, API SN, or earlier 5W-40 lubricant recommendations.
• Meets specifications including ACEA C3, API SN Plus, BMW Longlife-04, Fiat 9.55535-S2, and MB 229.31/229.51/229.52.

Today\'s engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense pressures cause friction, which can waste up to 10% of an engine\'s performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most.

Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Application

Castrol EDGE 5W-40 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends: ACEA C3, API SN/CF Lubricant

Castrol EDGE 5W-40 is approved for use in vehicles from leading manufacturers please refer to the product performance section and your owners handbook.

*GM dexos2TM: supersedes GM-LL-B-025 and GM-LL-A-025 : GB2D0114082

Advantages

Castrol EDGE 5W-40 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today\'s modern vehicles requiring a high level of protection and higher performance oils.

• Transforms to be strongest when the pressure is highest, protecting your engine
• Reduces power-robbing friction across engine speeds and conditions
• Independently tested at the highest standards for proven performance
• Recommended by world-leading car manufacturers
• Protects the engine for the entire drain interval even under extreme pressure

Product Performance Claims

• ACEA C3
• API SN/CF
• Meets Fiat 9.55535-S2
• Meets Ford WSS-M2C917-A
• GM dexos2(TM) *
• MB-Approval 226.5/ 229.31/ 229.51
• Renault RN 0700 / RN 0710
• VW 505 00/ 505 01

Supplementary Information.

• Castrol EDGE with patented Fluid TITANIUM enhances engine performance under pressure.
• Suitable for use in gasoline and diesel vehicles meeting ACEA C3, API SN/CF standards.
• Offers maximum engine protection, reduced friction, and proven performance.
• Complies with ACEA C3, API SN/CF, GM dexos2(TM), and other major specifications.

Castrol MAGNATEC 5W-40 C3

Non-stop protection from every start.

Description

Clinging molecules, reinvented.

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times1 a year.

That's annoying, but worse, it slowly damages your engine – permanently.

Uniquely, Castrol MAGNATEC's breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

Form a powerful force field of protection

Dramatically reduce both warm-up2 and stop-start3 wear by 50%

Deliver unique patented protection designed specifically for modern driving

Non-stop protection from every start.

1 Global average from 50 cities, Castrol MAGNATEC STOP-START Index 2014

2 Tested versus the Sequence IVA API SN wear limit.

3 Tested versus the CEC OM646LA ACEA wear limits

Application

Castrol Magnatec 5W-40 C3 is suitable for use in automotive gasoline and diesel engines where the manufacturer recommends an ACEA C3, API SN or earlier specification 5W-40 lubricant.

Castrol Magnatec 5W-40 C3 is approved for use in a vehicles from a wide range of manufacturers, please refer to the specifications section and your vehicle handbook.

Castrol EDGE 5W-40

Fluid TITANIUM - Stronger Under Pressure

Description

Today's engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient, without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense

pressures cause friction, which can waste up to 10% of an engine's performance.

Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep metal apart and reduces friction for maximum engine performance when you need it most.

Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.

Application

Castrol EDGE 5W-40 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends: ACEA C3, API SN/CF Lubricant

Castrol EDGE 5W-40 is approved for use in vehicles from leading manufacturers please refer to the product performance section and your owners handbook.

*GM dexos2TM: supersedes GM-LL-B-025 and GM-LL-A-025 : GB2D0114082

Advantages

Castrol EDGE 5W-40 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine performance from today's modern vehicles requiring a high level of protection and higher performance oils.

Castrol EDGE 5W-40:

Transforms to be strongest when the pressure is highest, protecting your engine

Reduces power-robbing friction across engine speeds and conditions

Independently tested at the highest standards for proven performance

Recommended by world-leading car manufacturers

Protects the engine for the entire drain interval even under extreme pressure

Magnatec 5W-40 DPF

CLINGING MOLECULES PROTECT FROM THE START

Description

Up to 75% of engine wear happens while your engine warms up. When the engine stops oils drain off critical engine parts, however Castrol MAGNATEC 5W-40 DPF's intelligent molecules don't. They cling to the engine like a magnet

providing an extra layer of protection.

Castrol MAGNATEC 5W-40 DPF's formulation protects from the moment you start, dramatically reducing* engine wear, for protection you can see, hear and feel.

Castrol MAGNATEC 5W-40 DPF. Instant Protection From The Moment You Start.

*As tested in the industry Sequence IVA wear test.

Application

Castrol MAGNATEC 5W-40 DPF is suitable for use in automotive diesel and gasoline engines where the manufacturer recommends an API CF/SN or ACEA C3 5W-40 lubricant including vehicles fitted with a diesel particulate filter.

Castrol MAGNATEC 5W-40 DPF is approved for use in vehicles from a number of leading manufacturers please refer to specifications and owner's hand book.

Advantages

Castrol MAGNATEC 5W-40 DPF:

Synthetic Diesel technology to provide increased protection in high and low temperature applications;

Provides continuous protection for all driving conditions, styles and temperatures;

Delivers superior performance under extreme cold start up conditions

Castrol MAGNATEC 5W-40 DPF - suitable for TDI, DI, Inter-cooled, Turbocharged engines, CRDI engines.

Magnatec 5W-30 C3

NON-STOP PROTECTION FROM EVERY START

Description

Clinging molecules, reinvented.

Traffic congestion has increased dramatically; today even a normal driver can stop and start up to 18,000 times1 a year.

That's annoying, but worse, it slowly damages your engine – permanently.

Castrol MAGNATEC's unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to protect.

Castrol MAGNATEC. Non-stop protection from every start.

1 Global average from 50 cities, Castrol MAGNATEC STOP-START Index 2014

Application

Castrol MAGNATEC 5W-30 C3 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer recommends an API SN, ACEA C3 or earlier specification 5W-30 lubricant.

Advantages

Castrol MAGNATEC's unique breakthrough DUALOCK molecules cling to critical engine parts and lock together to:

Form a powerful force field of protection

Dramatically reduce both warm-up2 and stop-start3 wear by 50%

Deliver protection designed specifically for modern driving

2 Tested versus the Sequence IVA API SN wear limit.

3 Tested versus the CEC OM646LA ACEA wear limits.




Typical Characteristics

Name




Method




Units




Castrol Magnatec 5W-30 C3|




Density @ 15C, Relative




ASTM D4052

g/ml




0.853




Viscosity, Kinematic 100C




ASTM D445

mm²/s




12.1




Viscosity, CCS -30C (5W)




ASTM D5293

mPa.s (cP)




5800




Viscosity, Kinematic 40C




ASTM D445

mm²/s




72




Viscosity Index




ASTM D2270




None




165




Pour Point




ASTM D97




°C




-42




Flash Point, PMCC




ASTM D93




°C




201




Ash, Sulphated




ASTM D874




% wt




0.8




Flash Point, COC




ASTM D92




°C




235