Tetrion Flexible Ready Mixed Woodfil 330g

Tetrion Flexible Wood Filler is an easy-to-use, ready-mixed filler suitable for interior and exterior use. The filler bonds strongly to wood and leaves a water-resistant, super-smooth finish, which can be stained, varnished or painted. Tetrion Flexible Wood Filler is resistant to shrinking or cracking and is suitable for wood-filling repairs to doors, skirting boards, floor boards, window frames, nail holes, etc.

ADVANTAGES

• Super smooth and flexible
• Shrinking and cracking resistant
• Interior/Exterior Use
• Easy sanding
• Can be nailed or screwed
• Rapid drying and low odor

APPLICATION

• Ensure surfaces are dry clean and free from dust and loose materials. Remove all decayed wood down to dry, sound materials. Allow damp wood to dry completely.
• Stir filler thoroughly to form smooth paste.
• Apply with filling knife, pressing filler firmly into repair. Smooth off.
• Build up deep repairs in layers no more than 5mm. Allow each layer to dry thoroughly before applying next layer.
• Filler starts to set in approximately 2-3 hours, depending on the depth of the filler and temperature/humidity. Allow thicker layers (above 5mm) to set overnight.
• Once dry, sand smooth and paint, stain or varnish.
• After use, to keep remaining filler in perfect condition, replace plastic disc, cover with damp rag and reseal lid.
• Wash tools with warm water.
• Store away from frost.

Note: Avoid using in wet or damp conditions. If rain or moisture is expected, cover repair with waterproof material until filler has fully set. Protect from temperatures below 5°C until set. Filler may stain/varnish differently to surrounding timber. Test on a small area to assess whether appearance is acceptable.

AVAILABILITY

330g – WFN330