Nilco Angel Clear - Mould & Algae Remove

Nilco Angel Clear Mould & Algae Remover contains a fast acting, powerful fungicide designed to eliminate mould, algae, and fungus at the source and control re-growth for long-lasting results. The bleach-free formulation is suitable for use on internal & external walls, tiles, PVC and patios. 

Directions for Use:

1. Remove the cap and attach the Power Lance (full instructions included in the Power Lance Box)
2. Ensure the area to be treated has been swept and is clear of debris, pets and people. We recommend the use of gloves and a face mask whilst spraying to avoid inhaling the fine mist.
3. Spray Angel Clear over the surface to be treated, taking care not to overspray and avoid any plants or water courses.
4. Allow the treatment to dry - Angel Clear should not be applied within 12 hours of expected rainfall and is best applied during overcast conditions.
5. For stubborn stains, the surface may require agitation by brush before a second application of Angel Clear.
6. Do not rinse off. Allow to dry.

Note: Avoid contact by pets and people with treated surfaces until dry. Do not apply in strong direct sunlight.

Statutory Conditions for use:

For use only as a surface biocide. Apply 500ml of product per 2 square metres of surface. Wear suitable protective clothing (coveralls) and synthetic/PVC gloves when using. Do not breathe spray mist. Otherwise wear respiratory protective equipment and eye protection (see HSE guidance booklet HS(G)53 ''Respiratory protective equipment - a practical guide for users'')

Do not contaminate foodstuffs, eating utensils or food contact surfaces. Cover water storage tanks/bowls before application. This product and its container must be disposed of in a safe way. When using, do not eat, drink, or smoke. Unprotected persons and animals should be kept away from treated area for 48 hours of until surfaces are dry.

Prevent any surface run-off from entering drains. Dangerous to fish and other aquatic life. Do not Contaminate watercourses or ground. Avoid all contact with plant life. This product is approved under The Control of Pesticide Regulations 1986 (as amended) for use of directed. HSE 10877 use only in accordance with the directions stated above and on the product label.

Supplementary Information.

• Eliminates mould, algae, and fungus at the source - penetrating into the affected area to kill spores
• Suitable for use on internal & external walls, tiles, PVC, & Patios
• Equipped with the Power Lance to cover larger areas with the fast acting formuation
• Bleach free formulation does not leave unpleasant smells