Tetroseal Underbody Sealant Aerosol 500m

Tetroseal Underbody Sealant has been specially formulated to protect vehicles against corrosion, rust, stones, salt and water, extending the vehicle life and helping to maintain value. Tetroseal is a technologically advanced, highly structured underbody sealing compound which is particularly resistant to sagging when applying and provides excellent sound deadening qualities.

DIRECTIONS FOR USE

1. Ensure the surface to be treated is dry and free from old flaking underbody sealant, loose rust, dirt & grease.
2. Mask off grease nipples, etc., with tape or newspaper.
3. Shake can well before use (for a minimum of 2 minutes).
4. Spray a thin coat of Underbody Sealant at a distance of 25-30cm, spraying in a side to side motion.
5. Allow first coat to dry for 30-40 minutes, then apply the second coat for extra protection.

CAN BE APPLIED TO:

Door sills, under wings, wheel arches, boot lids & engine bonnets.

To completely seal the car against drumming, apply a coat inside the door panels and on the bare metal floor of the car. To remove Tetroseal Underbody Sealant from paintwork, wipe off immediately with white spirit.

IMPORTANT: Do not apply directly to rubber or plastic components, or to brake discs or pads. If contact does occur remove excess product by wiping and then wash the area with soap and water. Remove excess from other areas with white spirit. Ensure all equipment is cleaned immediately after application with white spirit, followed by hot, soapy water. Keep container sealed when not in use. Store in a cool, dry place. Protect from frost.

Supplementary Information.

• Helps to extend vehicle life and to maintain value
• Can be applied to: Door sills, under wings, wheel arches, boot lids and engine bonnets
• Particularly resistant to sagging when applying
• Provides excellent sound deadening qualities